Triple-Seal Draft Stopper Strip
Seal Gaps. Block Noise. Cut Drafts.
Triple Hollow Soundproof Chambers
The tri-cavity design creates multiple air barriers that improve overall sealing and reduce noise transmission.
Three-Layer Sealing for Tighter Fit
Layer-by-layer sealing compresses gently when the door opens and closes, minimizing gaps and leaks.
Soft Bottom Edge — Floor-Safe
The flexible lower lip glides silently without scratching wood, tile, or laminate floors.
Peel-and-Stick Acrylic Adhesive
High-bond tape holds strong even in humid areas. No screws, no drilling — just peel, stick, and press.
All-Season Comfort
Blocks drafts, dust, insects, light, and odors. Keep warm air in during winter and cool air in during summer.
Specifications
| Length (per strip) | 100 cm ≈ 39.4 in (cut-to-fit) |
| Total Height | ≈80 mm ≈ 3.15 in (Hard 50 mm + Soft 30 mm) |
| Thickness | ≈2.1 mm ≈ 0.083 in |
| Adhesive Width | ≈17.5 mm ≈ 0.69 in |
| Material | Thickened PVC (rigid back + soft sealing edge), acrylic adhesive |
| Colors | Black / White |
| Best For | Noise reduction, draft blocking, dust & insect barrier, light blocking |
| Compatibility | Wooden doors, sliding doors, glass doors (clean, smooth surfaces) |
How to Install
- Clean and dry the door bottom thoroughly.
- Measure and cut the strip to length.
- Peel the backing and align to the door bottom.
- Press firmly for 60 seconds; allow adhesive to set for several hours.
FAQ
Q1: Will it damage the floor?
A: No. The soft bottom edge glides smoothly and won’t scratch floors.
Q2: Can it be removed?
A: Yes. Warm the adhesive with a hair dryer and peel slowly; clean residue with mild remover.
Q3: Does it work on uneven floors?
A: Best on flat surfaces. For large gaps or uneven floors, adjust the position or use two strips.